Product Description
GFM1450
Automatic high speed flute laminating machine with pile stacking
Video link:
1. https://www.youtube.com/watch?v=xz2iD1LRdJs&feature=youtu.be
2. https://www.youtube.com/watch?v=sGmybt5LVq0&feature=youtu.be
3. https://youtu.be/hSUkcvSTeaE
4. https://www.youtube.com/watch?v=kmZw43jo87g&feature=youtu.be
5. https://www.youtube.com/watch?v=X_je-cz-2og&feature=youtu.be
1. Product
description
1.1
function:
The
paper can be laminated with paperboard to increase the strength and thickness
of the material or special effects. After the die-cutting, it can be used for
packaging boxes, billboards and other purposes.
1.2
Structure:
A.
Upper Paper Feeder: It can send stacks of 150-800gsm paper from above.
B.
Bottom feed: It can send 0.5~1Omm paperboard from below.
C.
Gluing mechanism: The glued water can be applied to the fed paper.
D.
Regulatory organization - Fits the two papers according to the set tolerances.
E.
Pressurizing Conveyor... Presses the attached paper and conveys it to the
delivery section.
1.3
Principles:
The top
paper is sent out by the upper paper feeder and sent to the start detector of
the positioning mechanism for detection. Then the bottom paper is sent out;
after the bottom paper is coated with glue on the glue wheel, the top paper and
the bottom paper are respectively conveyed to the paper Synchronous detectors
on both sides, after the detection, the controller calculates the error value
of the paper and the bottom paper, and the servo compensation device on both
sides of the paper compensates the paper to a predetermined position for
splicing, and then pressurizes the conveying. The machine presses the paper and
conveys it to the delivery machine to collect the finished product.
1.4
applicable materials:
Paste
paper --- 180 ~ 800g/m thin paper, cardboard.
Bottom
paper---0.5~10m/m paperboard, single-sided cardboard, multi-layer corrugated
paper, pearl board, honeycomb board, styrofoam board.
Glue -
resin, etc., PH value between 6 ~ 8, can be applied to the glue.
Structural features:
◆
Adopting the world's leading transmission control system, only need to input
paper size system auto-tuning.
◆
Computerized high-speed fitting, up to 12,000 pieces per hour.
◆
Chuanliu-type air supply head, with four sets of forward nozzles and four sets
of suction nozzles.
◆
Feida Block adopts low stack cardboard, which can fit the paper to the pallet,
and can install track-assisted pre-stacker
◆
Use multiple sets of electric eyes to know the advance position of the bottom
line, and make the servo motor on both sides of the face paper to independently
rotate to compensate the upper and lower paper alignment, which is accurate and
smooth.
◆
Full-function electronic control system, using human-machine interface and PLC
program model display, can automatically detect operating conditions and work
records.
◆
Automatic glue replenishment system can automatically compensate for lost glue
and cooperate with glue recycling.
Parameters:
|
Model
|
GFM1450
|
|
Max size
|
1450*1450
|
|
Min size
|
450*450
|
|
Paper
|
150-800g
|
|
Bottom paper
|
≤10mm ABCDEF
corrugated board
|
|
Max speed
|
12000pcs/h
|
|
Power
|
15kw
|
|
Accuracy
|
±1mm
|
TRANSMISSION:
With imported double teeth belt drive and
Switzerland ROSTA tension device ensure the drive accurate, stable and low
noisy.
PRE-STACK PART:
Pre-stack pile of paper under the condition of
non-stop, improve efficiency. The special design of the pre stack paper frame,
save time and effort.
ELECTRICAL SYSTEM:
Designed in the accordance with European CE
requirement, ensure machine stability, high efficiency and low failure. Using
man-machine interface and PLC combination, display all the information, such as
warning, error detect, failures, and operating speed, etc on the screen at a
glance.
Some parts list
Automatic pile turning and
stacking machine
Technical parameters:
|
Machine model
|
ZF-1450
|
|
Max paper size
|
1450*1450mm
|
|
Min paper size
|
450*550mm
|
|
Power
|
8kw
|
|
Power supply
|
380V, 3phases
|
|
Production speed
|
10000pcs/hour
|
|
Air pressure
|
0.65-0.85Mpa
|
|
Machine weight
|
About 4000KG
|
|
Machine dimension
|
4780*2170*2850mm
|
Machine specification:
This fully automatic turning and stacking machine is
an accessory paper product machine, which comprises a slow dilivery table, a
stack of paper table, a turning talbe and a delivery table, which are
sequentially connected, where in the slow feeding table and the paper feeding
unit are after the paper is stacked into a stack of paper and fed into turning
table. The paper stack is turned over once and then turned to the top of the
turning table by the belt turning mechanism in the turning table. And then fed by
the belt conveying mechanism. After the paper separation mechanism enters the
top of the receiving table. Thereby achieving full automatic paper counting,
paper turning and paper stacking. Paper and greatly reduce the need for
manpower and effectively improve the effciency of delivery. Reduce the manual
delivery intensity.
The new flip-receiver adopts a newly designed delivery
bin, which completely solves the indentation caused by the collision of paper
and metal in the production process of the old flip type delivery machine.
A new belt conveying mechanism was added to replace
the old paper feeding mechanism, which solved the crease caused by the paepr
being overweght and pushing the paper.
.png)
Contact Now